Uncategorized

How To Clean The Roof Ceiling In Your House Correctly

Have you noticed that your roof ceiling is dirty and yellowish? Since you moved, have you not cleaned them once?

In this article we will learn:

  1. How to clean the paint ceilings?
  2. How to clean the tile roofs?
  3. How will you clean the wooden or wallpaper ceilings?

It is normal that over time the ceiling accumulates dirt, dust and bad odors so it is necessary to clean it from time to time. We tell you how to do it without complications.

  1. How to Clean the Painted Ceilings?

In case your roof is painted like most homes, then you simply need a dry rag tied to a broomstick to clean it. Generally, the paint on the ceilings are not washable so the cloth should be dry. Only in case the roof has moisture stains will apply some fungicidal product and then give a coat of paint.

If the roof shows signs of tobacco stains or food, then you should wipe it with warm water and vinegar. Most likely, the paint has dissolved when cleaning it. Therefore, you will need to paint it to cover the damage.

  1. How to Clean the Tile Roofs?

The bathroom or the kitchen are rooms that, in majority, are tiles. In this case, the cleaning of the ceiling should be done with a damp cloth and with a little neutral soap. For the joints, you can use a toothbrush. If when the joints are cleaned and you notice that it has an opaque and yellowish color, you can apply a bleach for the joints.

  1. How to Clean Wooden or Wallpaper Ceilings?

For this type of roof, you only need a clean and dry cloth. Remove all the dust and cobwebs you find. When you finish, you should check that there is no moisture. If there is, remove the paper or wood panels and apply a product that removes moisture.

For stains existing on wallpaper, you can use stain erasers to remove them. For wood, you should use a little water or a product suitable for this material.

Other Things to Keep in Mind

Cleaning the roof ceiling is usually a task that is always left for the last because it seems complicated. However, the secret to keep the roofs of your home clean is to do it regularly.

If we do not do it periodically, they become a tedious and complicated place to clean. Ceilings can accumulate not only dust and spider webs, but also mold, humidity and microbes that can be harmful for your family’s health.

If you have a house with very high ceilings, you can buy an extended stick to place the brush or feather duster. This tool should be covered with a rag to remove the dirt, leaving no stains on the ceiling paint.

If your ceiling is moldy or if you spot a moisture, it is best to clean it with bleach diluted in water.

As for the kitchen ceilings, which become darkened by smoke and grease, it is not convenient to clean them. If they have deteriorated too much, the best thing to do is to renew the paint.

Do you need a help for roofing installation and maintenance? Don’t be shy to contact us!

 

Uncategorized

5 Tips for Preventing Storm Damage to Your Roof

When a storm hits, the wind blows hard and for a long time. High winds and falling debris can easily damage a roof in a storm.

There are many damages that you can prevent during this type of storm. Below, I share 5 short tips on how you can avoid storm damages and identify it early.

  1. Regular maintenance of the roof

Sometimes we see that many roofs have not been maintained for a long time. By regularly keeping your roof maintained, damage can be prevented ahead of time.

  1. Roof Tile: Loose or crooked roof tiles

By regularly inspecting your roof, you can prevent damage caused by fluttering roof tiles. If pans are loose or skewed, place them back as quickly as possible. A crooked or loose roof tile can easily come loose in a gust of wind.

The pressure of the roof tiles above can also cause a whole row of roof tiles to come loose. Roof tiles can be straightened if they are not damaged and there is no further damage to the tile battens. Proceed with caution and in particular, also support the overhead tiles during straightening.

  1. Lead Roof: Upright and loose lead roof

A lead roof can usually be found in places where the wall and roof are connected. This is possible both with a flat roof on, for example, an extension and with the finishing of a sloping tiled roof.

Do you see the lead rise or be detached from the jointing? Then take immediate action to prevent worse. Wind can further damage the lead and also allow water to blow under the lead. Preferably let a specialist look.

Do you want to get started yourself? Then use a special kit that is available for this to repair. Equipment and other sealants contain components that help you with this. Otherwise, you can contact us and let our professional do the hard work.

  1. Flat roof: loose and curling edges

The most damage on flat roofs starts at the edge of the roof. Regularly, take a look at your flat roof and clean it occasionally. From the roof itself or above, you can see the edges of the roof tile clearly.

Damage is usually the first visible at the corner where the roof covering can become loose or curl up when the wind comes under this can pull the roof covering off the roof. Proper distribution of the roof gravel can help prevent this.

  1. Chimney: masonry and jointing

For brickwork chimneys, regularly check the brickwork and jointing visually for cracks. This is because cracks can indicate loose brickwork, which can cause stones or cement to become detached from the chimney in a strong wind. Often, the fireplace will also contain lead at the connection to the roof, see the tip above.

In summary: check your roof regularly

By regularly taking a look at your roof, you will quickly see if something deviates from the normal situation and you can take immediate action. Check the roof especially after extreme weather, and take immediate action at the first signs of damage. Contact us for professional roofing works!

Uncategorized

The Best Materials of a Flat Roof

In the United States, there are still many buildings with a flat roof. The types of roof covering on these roofs are very diverse. On the older buildings, it is sometimes still mastic, but also bitumen and EPDM are common options. In this article, we will explain which type of roofing you can best choose for your flat roof.

For a flat roof, the above-mentioned type of mastic, bitumen, and EPDM are the most obvious types of roof covering. Mastic is no longer used today (its application is banned at the end of the 1970s), but it is still on many European roofs. The condition of these roofs is generally not good, to be honest.

This has everything to do with the limited lifespan of mastic, a material that due to its tarry nature is very sensitive to weather influences. It becomes liquid under the hot summer sun and brittle in the chilly cold. Do you still have a flat roof with mastic? Then we advise you to replace the roof covering in order to better protect the underlying roof construction.

Replacing the Flat Roof

Replacing mastic can be done with bitumen, a roof covering material that has been used very often in recent decades. That is not surprising because, for the flat roof, it offers many advantages in comparison with mastic. Disadvantages are there, however, and they are particularly related to ease of use and longevity.

Although the service life is much better than with roof tiles, it still ages relatively quickly compared to more modern alternatives. Replacing the roof covering is also a big job – a burner is needed for this, which entails the necessary time, costs and danger. Countless buildings have been burnt down in the past.

Lifetime of a Flat Roof with EPDM

The disadvantages of bitumen ensure that there is a need for a roof covering that not only excels with a long service life, but that can also be applied easily and without risk. The answer is EPDM, a versatile type of rubber that has virtually no disadvantages when used as a roof covering on a flat roof.

Buying EPDM Roofing

Buying EPDM roofing materials is easy to get nowadays online. You can easily submit the dimensions via the webshop and within a few days, you will receive customized EPDM roofing at home or at your company . Doubt about the possibilities and which one is best for you? Then contact our customer service to find a bespoke solution.

The Application of EPDM Roof Covering

Placing EPDM on a flat roof is a piece of cake. The material is, in fact, easy to bond with contact and soil adhesive that you can order together with the roof covering. The lifespan is also unrivaled – scientific research shows that a roof with EPDM lasts up to half a century.

Founded in 1954, Wayne’s Roofing & Sheet Metal‘s goal is to provide the highest quality products and professional workmanship in roofing. Find out our best-in-class roof maintenance service here.

WAYNE'S ROOFING & SHEET METAL
Certified Roofing Contractors License Number: CCC054806

Contact Us

Hours: Weekdays 8:00 a.m -4:00 pm

1024 S. Nova Rd. Ormond Beach, FL 32174

Phone386-255-3633